Wrist Pin Cushion

This wrist pin cushion, surely will help to increase your sewing productivity. Follow these simple step and preparation to create your own wrist pin cushion.

Equipment & Materials
  • Materials: patchwork, 2mm sponge foam, plastic button (D: 2 cm), thread needle, wool needle 1 mm, velcro (W: 2cm), dacron, and elastic ban (W: 2cm)
  • Equipment: Sewing machine (optional), scissors, needle, pin needle, ruler, and pair of compassses/ any tools to draw a circle
Step-by-step
1. Draw the circle (R: 4 cm) on patchwork and cut it
2. Draw circle on sponge foam (R: 3.5 cm) and cut it
3. Cut the velcro with length of 3 cm
4. Cut the elastic ban with length of 17 cm
5. Sew the patchwork by following the circle line, give 2 cm cut open between start and end sewing point, and don't forget to give seam allowance around 1 cm from the edge
6. Before you turn it inside out, make sure you cut the edge a little bit
7. Turn the patchwork inside out
8. Insert the sponge foam to the patchwork cushion
9. Insert the dacron to patchwork cushion, make sure you insert it only on one side
10. Joining two layer of fabric using invisible seam stitch carefully
11. Sew the velcro on elastic ban. One fasterner on the top edge, and another one on the bottom edge
12. Install the elastic ban on the cushion (on patchwork with sponge foam on its side)
13. Put it on the corner of the cushion, make sure to install the velcro with the smooth surface
14. Install it by hand stitching on 4 dot as marked on picture above
15. Use the wool thread to create the flower pattern on cushion
16. Add and stitch the plastic button in the middle
17. Make sure that the installed elastic ban looks like picture above (only half of the part attached)
18. The elastic position on step 17 will help cushion's flexibility when its attached on hand or sewing machine
Tips

Cutting the patchwork & sponge foam

The diameter is flexible, you can adjust it from 8-10 cm. Just don’t forget to add seam allowance on patchwork, while for sponge foam, no need to add seam allowance when cutting it. Just cut exactly on the drawing line.

Attach the smooth surface of the velcro on cushion

We suggest to attach the smooth surface of the adhesive velcro to avoid itchiness on the hand when using it.

Step 12 (install the elastic) and step 15 (stitching on wool thread) are switchable

You can switch step 12 with step 15 if you felt that the elastic position is making the stitching process of the wool on cushion harder. 

Only half part of the adhesive velcro attached on the cushion

We suggest to attach only half part of the adhesive to make velcro position more flexible yet also not reduce the adhesion of thee velcro.

Video Tutorial

Contact Us

Whatsapp

Thank you for visiting us!